Essays about: "Milling tools"

Showing result 6 - 10 of 32 essays containing the words Milling tools.

  1. 6. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

    University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

    Author : Oskar Lundquist; [2022]
    Keywords : CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

    Abstract : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. READ MORE

  3. 7. Variations in material properties of grey cast iron and its impact on tool wear

    University essay from Lunds universitet/Industriell Produktion

    Author : Andreas Söderholm; [2021]
    Keywords : Grey cast iron; hard inclusions; tool wear; machinability; graphite structure.; Technology and Engineering;

    Abstract : Among cast materials, grey cast iron and ductile iron makes up about three quarters of all cast parts. This makes the manufacturing and machining of grey cast iron an important economical factor for the automotive industry. READ MORE

  4. 8. Temperature effect on insert tool life in dry machining

    University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematik

    Author : William Hagberg; [2021]
    Keywords : Milling tool; Temperature; Wear; Simulation; Cooling; Heat sink; Insert;

    Abstract : This thesis work researched the temperature effects the insert tool life. This was examined through physical laboratory testing with designed milling tools and temperature simulations in ANSYS. The designed milling tools altered the temperature in the insert through external parameters like design and material. READ MORE

  5. 9. Analysis of a machining process for glass fiber composites

    University essay from Lunds universitet/Industriell Produktion

    Author : Aron Bjarnason; [2020]
    Keywords : Milling; Composites; FRP; PCD; Coated cemented carbide; Machine productivity; Technology and Engineering;

    Abstract : The aim for this study is to observe and conduct experiments on a composite productions machining process in order to gather knowledge and data on the process. The information will be used to make recommendations for improving the process in terms of production capacity and product quality. READ MORE

  6. 10. Extraction of tool reaction forces using LS-DYNA and its use in Autoform sheet metal forming simulation

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Esbjörn Zachén; [2019]
    Keywords : Sheet Metal Forming; Stamping Die; blank holder; Structural Analysis; Finite Element Simulation;

    Abstract : In product development there is still potential to decrease lead times with faster and more accurate simulations. The objective of this thesis was to study whether Finite Element (FE) simulations using explicit LS-DYNA to extract reaction forces from sheet metal forming tools during forming, could be used to improve existing FE models in sheet metal forming software AutoForm. READ MORE