Essays about: "icke-linjära material modeller"

Showing result 1 - 5 of 7 essays containing the words icke-linjära material modeller.

1. 1. Non-Linear strain paths in Sheet Metal Forming

   University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

   Author : Anton Eriksson; [2021]
   Keywords : Sheet metal forming SMF ; Non-Linear strain path NLSP ; Test procedures; Failure models; Finite Element FE ; Plåtformning; Icke-linjära töjningsbanor; Test procedurer; brott model; Finita Element FE .;

   Abstract : Today's automotive requirements have resulted in complex Sheet Metal Forming (SMF) processes of Sheet Metal (SM) with reduced formability, and thus it is crucial to be able to predict formability accurately to prevent material failure during SMF. Formability predictions today utilize Forming Limit Curves (FLC)s in Finite Element Analysis (FEA), but  FLCs are not valid for the Non-Linear Strain Paths (NLSP)s generated during SMF. READ MORE

3. 2. Compression Characteristics of Elastomer Elements

   University essay from KTH/Skolan för industriell teknik och management (ITM)

   Author : Rahul Nagaraj Dixit; [2021]
   Keywords : Continuum mechanics; Hyperelasticity; Mooney Rivlin; Rack and Pinion; Kontinuummekanik; Hyperelasticitet; Mooney Rivlin; Kuggstångsväxel;

   Abstract : Compression of elastomer elements are nonlinear due to the cross-linked molecular structure owing to a property known as hyperelasticity. Hyperelasticity is defined as the nonlinear stress-strain behavior shown by rubber like materials which can be strained up to a range of 700% in tension and up to 40% in compression. READ MORE

4. 3. Non-Linear FE-Analysis of a Composite Action Girder with Coiled Spring Pins as Shear Connectors

   University essay from Luleå tekniska universitet/Institutionen för samhällsbyggnad och naturresurser

   Author : Simon Stahlin; [2019]
   Keywords : composite bridge; composite action; shear connector; coiled spring pins; finite element modeling; samverkansbro; samverkan; skjuvförbindare; spiralbult; finita element modellering;

   Abstract : For bridges to cope with increased requirements such as increased loads, strengthening work can be carried out. In cases where older steel-concrete bridges do not have a composite action, an alternative is to create composite-action to achieve a higher flexural strength. It is introduced by post-installing shear connectors. READ MORE

5. 4. Finite Element Analysis of the Dynamic Effect of Soil-Structure Interaction of Portal Frame Bridges - A Parametric Study

   University essay from KTH/Bro- och stålbyggnad

   Author : Turgay Dagdelen; Shaho Ruhani; [2018]
   Keywords : Soil-Structure Interaction; Railway Bridge; Portal Frame Bridge; Dynamic Analysis; Parametric Study; Nonlinear Analysis; Jord-struktur interaktion; Järnvägsbro; Plattrambro; Dynamisk analys; Parametrisk studie; Icke-linjär analys;

   Abstract : In Sweden, the railway sector currently faces the challenge of developing its first high-speed railway line, in response to the need to provide faster domestic and international transport alternatives. High-speed train passages on railway bridges can cause resonance in the bridge superstructure, which induce high accelerations that should not exceed the limits stipulated in the current design code. READ MORE

6. 5. Nonlinear analysis of reinforced concrete slab on partially softening ground : Ickelinjär analys av armerad betongplatta på delvis uppmjuknande grund

   University essay from KTH/Betongbyggnad

   Author : Yang Zhou; [2017]
   Keywords : Reinforced concrete slab foundation; Nonlinear analysis; FEM;

   Abstract : Reinforced concrete slabs are a conventional type of foundation that is widely used in residential, commercial and industrial buildings. Most of the slab foundations are constructed directly on the ground without another structural medium in between and some of the slabs are therefore influenced by ground softening. READ MORE