Essays about: "piv"
Showing result 1 - 5 of 23 essays containing the word piv.
-
1. PIV measurements of rotational flow in a porous medium : A masters thesis in fluid dynamics and experimental mechanics
University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikAbstract : The purpose of this work is to test the feasibility of using particle image velocimetry(PIV) for measurements of flow through a porous medium, more specifically in this casea rotating bed reactor S3. The results from experiments preformed can then be usedto validate and improve computational fluid dynamics models. READ MORE
-
2. Numerical evaluation of the ground vortex
University essay from KTH/Teknisk mekanikAbstract : This master thesis covers the realization of a CFD calibration study regarding the numerical simulation of the ground vortex phenomenon. As part of InVIGO project (EU CleanSky2), wind tunnel test campaigns were performed using a nacelle model combined with a movable raised floor. READ MORE
-
3. The Development of a New High Aspect-Ratio Turbulent Channel Flow Facility
University essay from KTH/Strömningsmekanik och Teknisk AkustikAbstract : Turbulent channel flows are of great interest for investigations of modified wall boundary conditions due to their well-understood characteristics and their broad applicability. In a reversal of typical trends, they can often be more difficult to investigate experimentally than to simulate owing to the far-reaching influence of corner effects as well as the need for development lengths in excess of 200 channel half-heights in order to produce high-quality flow. READ MORE
-
4. Simulation of Colorless Distributed Combustion
University essay from Lunds universitet/Institutionen för energivetenskaperAbstract : Colorless distributed combustion (CDC) is a promising novel technology to reduce emissions of carbon monoxide and nitrogen oxides in gas turbine combustors. CDC features a different flame regime than conventional gas turbine combustors, associated with a distributed reaction zone and low and uniform temperatures due to dilution of combustion air with exhaust gases. READ MORE
-
5. Enabling high-fidelity measurements of turbulent boundary layer flow over wing sections in the MTL wind tunnel.
University essay from KTH/MekanikAbstract : A reinforced fiber-glass model of a NACA 4412 wing profile is designed and set-up in the Minimum Turbulence Level (MTL) wind tunnel facility at KTH. The model has 65 pressure taps orifices, and the set-up includes two mounting panels designed to allow for particle image velocimetry (PIV) and hot wire anemometry (HWA) measurements of the boundary layer (to be performed in a future campaign). READ MORE