Essays about: "Experimental modal analysis"
Showing result 31 - 35 of 63 essays containing the words Experimental modal analysis.
-
31. Pilot Testing of a Hydraulic Bridge Exciter
University essay from KTH/Bro- och stålbyggnadAbstract : In the design of a railway bridge that is meant for train speeds larger than 200 km/h, the Swedish Traffic Administration requires a dynamic analysis in addition to the conventional static design. The models used for static design may not always be suitable for dynamic analysis, which could lead to inaccurate estimations of the dynamic response. READ MORE
-
32. Dynamic characterization of the tool holder material : An Experimental Thesis
University essay from KTH/Industriell produktionAbstract : The major factors putting limitation to high productivity and good product surface quality is machining vibration. A lot of scientific research has been concentrated controlling the vibration while machining. READ MORE
-
33. Development and Implementation of an Advanced Remotely Controlled Vibration Laboratory
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : Term of remote-lab is certain types of laboratories which practical experiments are directedfrom a separate area by remote controller devices. This study is part of developing andupgrading advanced vibration remote laboratory. READ MORE
-
34. Modal Analysis on a MIMO System : For an asphalt roller CC1200
University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknikAbstract : Impact hammer is the current modal testing way in Dynapac testing department. Due to highly damped characteristic of big construction machines, there are a few weaknesses for modal testing when using hammer, such as short response time, limited frequency resolution, poor quality of frequency response functions. READ MORE
-
35. Vibrational measurement techniques applied on FE-model updating
University essay from Linnéuniversitetet/Institutionen för maskinteknik (MT)Abstract : In this thesis, the dynamics of two plates overlapping and connected by three bolts are studied. The data collected in the test are used in modal analysis. The vibrational test and the modal analysis were made using an LMS system. Hammer excitation is used for the tests. READ MORE