Essays about: "low alloy steel"
Showing result 1 - 5 of 32 essays containing the words low alloy steel.
-
1. Influence from temperature variations in stacking fault energy on the mechanical properties of stainless steels
University essay from KTH/MaterialvetenskapAbstract : This paper investigates the mechanical properties and deformation mechanisms of austenitic stainless steels and how they relate to the material property of stacking fault energy (SFE) and its relation to temperature and nickel content. Austenitic stainless steels are commonly used and well known for good mechanical properties and deformation characteristics. READ MORE
-
2. Optimization of the process-route of a Nickel-base alloy : Investigation of Sigma-phase precipitation in heat treatment
University essay from Karlstads universitet/Fakulteten för hälsa, natur- och teknikvetenskap (from 2013)Abstract : The focus of this master’s thesis is on the heat treatment of Ni-base alloys, specifically the risk of intermetallic σ-phases during different stages of heat treatment. The alloy studied is Sanicro®28, a super-austenitic stainless steel produced by Alleima AB. READ MORE
-
3. Optimization of hot strip drawing test methodology for hot forming of aluminium alloys
University essay from Luleå tekniska universitet/Institutionen för teknikvetenskap och matematikAbstract : The development of lightweight design for automotive applications has lasted for many years and is still increasing. Vehicles with light structures use less fuel, emit less CO2, and are better for the environment. READ MORE
-
4. Dissolution of Cored Wire in Steel Melt : Optimization of Feeding Rate
University essay from KTH/MaterialvetenskapAbstract : Calcium treatment is an established operation in the production of steels. Most importantly, it serves to modify detrimental inclusions in the melt for improved castability and superior product properties. Due to calcium’s low melting point and high vapour pressure, its addition to liquid steel is challenging and yields are generally low. READ MORE
-
5. Aluminium Nitride-containing Steels for High-Temperature Low-Pressure Carburizing Processes
University essay from KTH/MaterialvetenskapAbstract : By increasing the temperature at which low-pressure carburizing is performed, the process time for production of case-hardened steels decrease but run a risk of abnormal grain growth occurring during carburizing. Particles present in the steel pin the grain boundaries and can prevent this growth depending on their size and volume fraction. READ MORE
