Essays about: "Sandvik Coromant"

Showing result 36 - 40 of 59 essays containing the words Sandvik Coromant.

  1. 36. Machinability analysis of cemented carbide -A theoretical and experimental study

    University essay from Lunds universitet/Industriell Produktion

    Author : Oskar Sörén; [2016]
    Keywords : Cemented carbide; Milling; Sandvik Coromant; Technology and Engineering;

    Abstract : Sandvik Coromant is the market leader of producing tools for advanced metal cutting. The tools are produced in cemented carbide, however Sandvik Coromant does not produce tools for machining cemented carbide. READ MORE

  3. 37. Wear on Alumina Coated Tools and the Influence of Inclusions when Turning Low-Alloy Steels : Master Thesis - Chemical Engineering

    University essay from Uppsala universitet/Tillämpad materialvetenskap

    Author : Sebastian Öhman; [2016]
    Keywords : Wear; Alumina; Al2O3; Coating; Coated; coatings; Tools; Cutting tool; Cemented Carbide; Inclusions; Steel; Steels; SS2541; Sandvik; Coromant; Nötning; Förslitning; Aluminiumoxid; Al2O3; Beläggning; Ytbeläggning; Tunnfilm; Tunnfilmsteknik; Verktyg; Skärverktyg; Hårdmetall; Inneslutning; Stål; SS2541; Sandvik; Coromant; Deformation;

    Abstract : In this master thesis, performed at Sandvik Coromant Västberga (Stockholm), a comprehensive study has been made to investigate the wear on textured alumina (Inveio™) coated cutting tools when turning low-alloy steels. Specifically, wear studies have been made on tools’ rake faces when turning two separate batches of SS2541, after an initial turning time of 4 min. READ MORE

  4. 38. Implementing a corporate Lean program : A case study to identify key factors for implementing Lean Management at Sandvik Coromant’s Production Unit in Langfang

    University essay from Högskolan i Gävle/Avdelningen för Industriell utveckling, IT och Samhällsbyggnad

    Author : Adam Jörtsö; Tim Westphal; [2015]
    Keywords : ;

    Abstract : .... READ MORE

  5. 39. Tool wear in turning titanium alloys

    University essay from Uppsala universitet/Institutionen för kemi - Ångström

    Author : Magnus Johansson; [2015]
    Keywords : Titanium machining; Tool wear; Crater wear; Turning; WC Co cutting tool;

    Abstract : In this master thesis, performed at AB Sandvik Coromant, wear and tool life of uncoated WC/Co grades have been investigated during longitudinal turning of the titanium alloy Ti-6Al-4V. Due to titanium’s poor thermal conductivity and high chemical reactivity towards most metals, high temperature is achieved between the tool and workpiece material, resulting in high tool wear rates. READ MORE

  6. 40. Deep hole drilling - Cutting forces and balance of tools

    University essay from Högskolan i Gävle/Avdelningen för bygg- energi- och miljöteknik

    Author : Carmen Malave; [2015]
    Keywords : Deep hole drilling; resultant radial force; cutting forces.;

    Abstract : Drilling is a standard process for producing holes in metal materials. With an increased hole depth the demands increase on both machine and tool. Deep hole drilling is a complex process which ischaracterized by a high metal removal rate and hole accuracy. READ MORE