Essays about: "chemical engineering"

Showing result 31 - 35 of 307 essays containing the words chemical engineering.

  1. 31. Impact of Implementing CCS Technology on a Biomass Power Plant

    University essay from Lunds universitet/Institutionen för energivetenskaper

    Author : Azin Mohebbi; [2023]
    Keywords : Technology and Engineering;

    Abstract : This study examines the implementation of carbon capture and storage (CCS) technology, specifically the monoethanolamine (MEA) chemical absorption method, in a biomass power plant. The aim is to assess the energy requirements and optimize the solvent processes to improve the overall efficiency of the carbon capture process. READ MORE

  3. 32. Accelerating the Green Transition - Investigating the Feasibility of E-Fuel Production Connected to a CHP Plant

    University essay from Lunds universitet/Institutionen för energivetenskaper

    Author : Johanna Scholtz; Alice Maillard; [2023]
    Keywords : CCU; CHP plant; e-fuels; e-methane; e-methanol; e-kerosene; Technology and Engineering;

    Abstract : The overall purpose of this thesis is to investigate the feasibility of producing electrofuels from CO2 and H2 in connection to a CHP plant equipped with carbon capture technology. This is done by investigating the production of e-methane, e-methanol and e-kerosene from captured CO2 and H2 produced from electrolysis. READ MORE

  4. 33. Fouling modelling in a UHT unit based on plant data.

    University essay from Lunds universitet/Livsmedelsteknik och nutrition (master)

    Author : Thai Lam; [2023]
    Keywords : UHT; dairy; tubular heat exchanger; fouling development; fouling removal; food engineering; Technology and Engineering; Agriculture and Food Sciences;

    Abstract : Heat treatment of dairy products is essential for food safety, one way to perform this is ultra-high temperature (UHT) processing. During the process, macronutrients and minerals form fouling deposits which impairs heat transfer. Eventually the fouling needs to be removed chemically by alkaline and acidic detergents. READ MORE

  5. 34. Characterisation of Ionic Liquid doped Polybenzimidazole Membranes for Application in High-Temperature Proton Exchange Membrane Fuel Cells

    University essay from Lunds universitet/Kemiteknik (CI)

    Author : Adam Jacobsson Trönndal; [2023]
    Keywords : Fuel cells; Phosphoric acid; Polybenzimidazole; PA-PBI; Ionic liquid; IL; High temperature proton exchange membrane fuel cell; HT-PEMFC; Electrochemical impedance spectroscopy; EIS; IL-PBI; Chemical engineering; Technology and Engineering;

    Abstract : In this study four membranes were tested and evaluated against each other for use in high-temperature proton exchange membrane fuel cell (HT-PEMFC) applications. A phosphoric acid (PA) doped polybenzimidazole (PBI) membrane, was used as a reference as the current state-of-the-art. READ MORE

  6. 35. Developing an Ar milling process to improve the contact quality to InAs nanowires

    University essay from Lunds universitet/Fysiska institutionen; Lunds universitet/Fasta tillståndets fysik

    Author : Chris Mkolongo; [2023]
    Keywords : InAs nanowires; Argon milling; Technology and Engineering;

    Abstract : The aim of this work was to develop a stable and reproducible argon milling process for InAs nanowires to remove the native oxide layer that increases electrical resistance. This was done by identifying a few milling parameters and studying them in relation to the milling rate of silicon dioxide (SiO2). READ MORE