Essays about: "corrosion protection"

Showing result 16 - 20 of 36 essays containing the words corrosion protection.

  1. 16. Laser Metal Powder Deposition of Austenitic Stainless Steel on Spheroidal Graphite Cast Iron : A corrosion resistant coating for the Food & Beverage Industry

    University essay from Högskolan Väst/Avdelningen för svetsteknologi (SV)

    Author : Alejandro José Molina Griggs; [2018]
    Keywords : LMPD; AISI 316L; Cast Iron; Corrosion Resistant Coating; F B Industry;

    Abstract : Spheroidal graphite cast iron is a material widely used in the industry for the manufacturing of all kind of covers and protective casings thanks to its good combination of mechanical properties, processability and cost. When cast iron components are put into service in corrosive environments the most common approach to protect the components is painting them. READ MORE

  3. 17. Radiation Effects on KBS-3 Barriers: SKB’s work so far

    University essay from KTH/Skolan för kemivetenskap (CHE)

    Author : Ismael Safi; [2017]
    Keywords : KBS-3; Repository; Radiation; Bentonite; Montmorillonite;

    Abstract : In the Swedish concept for final disposal of spent nuclear fuel, referred to as KBS-3, a three-layered protection system is used. The system consists of a copper canister holding the spent nuclear fuel deposited 500 meters in a repository built in groundwater saturated granitic rock. READ MORE

  4. 18. Low slope roofs : Moisture transfer in inverted roofs constantly exposed to high moisture loads and drainage systems

    University essay from KTH/Byggnadsteknik

    Author : Charalampos Antonopoulos; [2017]
    Keywords : inverted roofs; green roofs; corrosion; corrosion protection; paint coatings; drainage; horizontal valleys; drains; overflows;

    Abstract : Low slope roofs are roofs with an inclination between 1:16 and 1:4 and have been constructed and preferred for many years due to the benefits they present. The goal of the present work is to study the following problems of low slope roofs, as they are suggested by previous relevant theses and the current needs of the market. READ MORE

  5. 19. Defect formation in laser welded steels after use of corrosion protection coating

    University essay from KTH/Materialvetenskap

    Author : Elias Repper; Amanda Carsbring; [2017]
    Keywords : Laser welding; steel; porosity; mid-section bulging; defects; corrosion protection;

    Abstract : This bachelor thesis was made in collaboration with Scania. The objective was to find the cause for defects found in some rear axle welds. It was known axle material was coated with anti-corrosive oil. Oils were examined through ICP-AES, and then compared to the composition found on the surface of the steel samples. READ MORE

  6. 20. Corrosion protection of powder coatings : Testing the barrier properties and adhesion of powder coating on aluminum for predicting corrosion protection by Electrochemical Impedance Spectroscopy

    University essay from Högskolan i Jönköping/JTH, Produktutveckling

    Author : Björn Persson; johanna Svensk; [2017]
    Keywords : Electrochemical Impedance Spectroscopy; EIS; corrosion protection; powder coating; barrier properties; adhesion; aluminium;

    Abstract : The choice of corrosion protection system depends on the environment and needed lifetime for the product. The right corrosion protection should be selected in a sustainable point of view, since a well-selected coating system can reduce the environmental and economical impact, by using less and better material. READ MORE