Essays about: "milling project"

Showing result 6 - 10 of 38 essays containing the words milling project.

1. 6. Experimental Study and Modelling of Heat Transfer in Milling of Titanium Alloys

   University essay from Lunds universitet/Industriell Produktion

   Author : Belén Cámara Herrero; [2022]
   Keywords : Titanium alloys; heat transfer; milling; modelling; thermal simulation; Technology and Engineering;

   Abstract : The purpose of this project is studying heat transfer to indexable cutting tools during milling of a selection of titanium alloys, relevant to the industry. To achieve this goal, both experimental and theoretical models were contemplated to formulate the current thesis. READ MORE

3. 7. Analysis of implementing additive manufacturing for the making of casting patterns

   University essay from Lunds universitet/Industriell Produktion

   Author : Simon Håkansson; [2022]
   Keywords : 3D-printing; additive; manufacturing; polymer; plastic; wood; pattern; casting; molding; vacuum; sand; ABS; milling; turning; Technology and Engineering;

   Abstract : I den här rapporten undersöks möjligheten för att tillverka och använda gjutmodeller tillverkade genom additiv tillverkning, i folkmun kallat 3D-printing. Först görs en grundläggande analys över hur modellerna tillverkas idag och vilka krav som ställs på modellen. READ MORE

4. 8. Performance and Wear Behaviour of Coated and Uncoated Cemented Carbide Tools during Milling of Titanium Alloys

   University essay from Lunds universitet/Industriell Produktion

   Author : Juan Manuel Bello Bermejo; [2022]
   Keywords : Titanium alloys; milling; wear mechanisms; wear behaviour; cutting tool performance.; Technology and Engineering;

   Abstract : Purpose – The purpose of this project is to study the performance of uncoated versus coated cemented carbide tools when performing milling operations in heat treated titanium alloys, with the goal of establishing a base line of knowledge and methodology linked to these difficult-to-machine materials relevant for the metal cutting industry. Design/methodology/approach – The work that is carried out in this project comprise both literature review, that is presented as the state of the art as the necessary theoretical background to understand what is done; and experiments, that were designed and executed at Seco Tools in Fagersta in order to achieve the primary goal, testing and comparing different scenarios where cutting parameters played a key role. READ MORE

5. 9. Tribological behaviour of CVD diamondcoated tools during machining of highstrength aluminum alloy : Master thesis project on tribological behavior of super hard materials: chemicalvapor deposition diamond (CVD) coated cutting tools and polycrystalline diamond(PCD) cutting tools used in machining of high strength aluminium alloy

   University essay from Karlstads universitet/Institutionen för ingenjörsvetenskap och fysik (from 2013)

   Author : Oskar Lundquist; [2022]
   Keywords : CVD diamond coating; CVD; Aluminum machining; Tool coatings; PCD; diamond coating; diamond; Tribology; Material Science.;

   Abstract : Machining of Aluminum can be complicated due to large amounts of adhesion and diffusion of the aluminum onto the cutting tool, causing effects such as built-up layers and built-up edges. This leads to poor surface finishes and can significantly affect the tool life. READ MORE

6. 10. Cellulose oxalates in biocomposites

   University essay from KTH/Fiber- och polymerteknologi

   Author : Jiarong Liang; [2021]
   Keywords : cellulose; cellulose oxalate; compatibilizer; composite; mechanical properties; polypropylene; cellulosa; cellulosaoxalat; kompatibiliseringsmedel; komposit; mekaniska egenskaper; polypropylen;

   Abstract : Under de senaste åren, på grund av överanvändningen av icke förnybara resurser har den ekologiska miljön på jorden påverkats allvarligt. I takt med detta ökade oron bland människor om att resurserna skulle ta slut. Därför är det nödvändigt att utveckla och använda mer miljövänliga förnybara resurser. READ MORE