Essays about: "SSRT"

Showing result 1 - 5 of 6 essays containing the word SSRT.

1. 1. Effect of Proton Irradiation on the Mechanical Properties of Fe-10Cr-4Al in Liquid Lead

   University essay from KTH/Fysik

   Author : Gabriela Lapinska; [2023]
   Keywords : Fe-10Cr-4Al; Lead; Radiation Damage; Slow Strain Rate Testing; Fe-10Cr-4Al; bly; strålskador; Slow Strain Rate Testing;

   Abstract : Among the structural materials under consideration for future lead-cooled fastreactors, special attention is paid to ferritic Fe-10Cr-4Al due to its superior corrosionand erosion protective properties, as well as its insensitivity to liquid metalembrittlement in liquid lead. This thesis gives an inside look into the radiation damageproperties of the alloy and the possible embrittlement scenarios. READ MORE

3. 2. SSRT of 10-4 FeCrAl in LBE and Pb to Characterize Liquid Metal Embrittlement Effects

   University essay from KTH/Fysik

   Author : Daniel Stein; [2022]
   Keywords : Liquid Metal Embrittlement; Lead; Bismuth; Lead-Bismuth Eutectic; Slow Strain Rate Testing;

   Abstract : In this work the susceptibility of Fe-10Cr-4Al steel to liquid metal embitterment (LME)in low oxygen environment was investigated. slow strain rate testing (SSRT) wereconducted on 10-4 FeCrAl steel in a stagnant lead from 340-480◦C, lead-bismutheutectic (LBE) from 140-450◦C and lead-bismuth mixture at 375◦C with increasingbismuth content from 0. READ MORE

4. 3. Hydrogen-assisted stress corrosion cracking of high strength steel

   University essay from KTH/Materialvetenskap

   Author : Rohollah Ghasemi; [2011]
   Keywords : Hydrogen assisted stress corrosion cracking; Hydrogen embrittlement; High strength steel; Slow Strain Rate Test;

   Abstract : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of microstructure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. READ MORE

5. 4. Hydrogen-assisted stress corrosion cracking of high strength steel

   University essay from KTH/Skolan för kemivetenskap (CHE)

   Author : Rohollah Ghasemi; [2011]
   Keywords : Hydrogen embrittlement; hydrogen induced cracking; stress corrosion cracking; high strength steel; uniform corrosion; SSRT; hydrogen charging; fractography; hydrogen degradation;

   Abstract : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of micro-structure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. READ MORE

6. 5. Hydrogen-assisted stress corrosion cracking of high strength steel

   University essay from

   Author : Rohollah Ghasemi; [2011]
   Keywords : Hydrogen assisted stress corrosion cracking; Hydrogen embrittlement; High strength steel; Slow Strain Rate Test;

   Abstract : In this work, Slow Strain Rate Test (SSRT) testing, Light Optical Microscopy (LOM) and Scanning Electron Microscopy (SEM) were used to study the effect of microstructure, corrosive environments and cathodic polarisation on stress corrosion cracking (SCC) of two grades of high strength steels, Type A and Type B. Type A is manufactured by quench and tempered (Q&T) method. READ MORE