Essays about: "package"

Showing result 21 - 25 of 932 essays containing the word package.

1. 21. ROS-based implementation of a model car with a LiDAR and camera setup

   University essay from Uppsala universitet/Signaler och system

   Author : Marcus Nises; [2023]
   Keywords : LiDAR; ROS; stereoscopic camera; SLAM; Linux; rplidar a1; raspberry pi;

   Abstract : The aim of this project is to implement a Radio Controlled (RC) car with a Light Detection and Ranging (LiDAR) sensor and a stereoscopic camera setup based on the Robot Operating System (ROS) to conduct Simultaneous Localization and Mapping (SLAM). The LiDAR sensor used is a 2D LiDAR, RPlidar A1, and the stereoscopic camera setup is made of two monocular cameras, Raspberry Pi Camera v2. READ MORE

3. 22. Studying the Relationship between Architectural Smells andMaintainability

   University essay from Mittuniversitetet/Institutionen för kommunikation, kvalitetsteknik och informationssystem (2023-)

   Author : Alexander Berglund; Simon Karlsson; [2023]
   Keywords : architectural smells; software architecture; software maintenance; software metrics; software quality;

   Abstract : In recent years, there has been a surge in research on theimpact of architectural smells on software maintainability.Maintainability in turn encompasses several other qualityattributes as sub-characteristics, such as modularity andtestability. READ MORE

4. 23. Validation of Finite Element Model of a Tetra Pak Package

   University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

   Author : Warsame Mohamed Ali; Abdullahi Abdi Hashi; [2023]
   Keywords : Abaqus; HDPE; Package testing; Validation; Abaqus; HDPE; Pakettestning; Validering;

   Abstract : There is a high dependency on accurate finite element models in the packaging industry for concept selection, design and virtual validation of packages. One of themost used materials for these packages is High-Density Polyethylene (HDPE). Thismaterial is highly anisotropic, strain rate dependent and has different behavior intension and compression. READ MORE

5. 24. Micromechanical Characterization of Thin Paper Materials

   University essay from Lunds universitet/Fasta tillståndets fysik; Lunds universitet/Fysiska institutionen; Lunds universitet/Lunds Tekniska Högskola

   Author : Linus Bengtsson; [2023]
   Keywords : Micromechanical characterization; SEM; In situ tensile testing; Paper deformation; Fiber orientation; Paper mechanics; Technology and Engineering;

   Abstract : Hur ser framtidens hållbara förpackning ut och vad är den tillverkad av? För att besvara denna fråga blir mikromekanisk karakterisering av material en viktig parameter att utforska och förstå. I synnerhet är mikromekaniken hos tunna pappersmaterial intressant då materialet har användningspotential i flera förpackningsapplikationer. READ MORE

6. 25. Tuning Photovoltaic Properties of Two-dimensional Molybdenum Disulfide by Alloying: An ab initio study

   University essay from KTH/Materialvetenskap

   Author : Mochen Li; [2023]
   Keywords : Photovoltaic; Molybdenum disulfide; Absorption coefficient; ab initio material design; Fotovoltaisk; Molybdendisulfid; Absorptionskoefficient; ab initio materialdesign;

   Abstract : Addressing the urgent need for innovative energy solutions amidst increasing environmental concerns, the focus on photovoltaic solar cells is intensifying. Currently limited by the Shockley-Queisser limit, conventional silicon-based solar cells offer a maximum power conversion efficiency of 32%. READ MORE