Advanced search

Showing result 1 - 5 of 38 essays matching the above criteria.

  1. 1. Technical requirements for mooring goods in the Swedish Navy

    University essay from KTH/Hållfasthetslära

    Author : Dennis Ekman; [2023]
    Keywords : Mechanics; Solid Mechanics; Navy; FMV; Defence; Ship; Boat; Hawser; Mooring; Mooring goods; FEM; Mekanik; Hållfasthetslära; Marinen; Marin; Flottan; FMV; Försvaret; Skepp; Båt; Tågvirke; Förtöjningsgods; Tamp;

    Abstract : The objective of this thesis is to generate and enhance technical specifications for mooring equipment designated for the Swedish Navy, as commissioned by the Swedish Defence Materiel Administration. The technical specifications will primarily emphasize the capacity to endure various load scenarios imposed by the Swedish Defence on the mooring equipment. READ MORE

  3. 2. Experimental Testing of EPS-foam

    University essay from KTH/Hållfasthetslära

    Author : Carl Göransson; Erik Arnald; [2023]
    Keywords : Solid Mechanics; EPS; Experimental testing; Hållfasthetslära; EPS; Experimentell testning;

    Abstract : The aim of this master thesis was to investigate the mechanical properties of ExpandedPolystyrene (EPS) through experimental testing. The strain was measured on thespecimen’s surface with Digital Image Correlation (DIC), in order to investigate howthe first principal strain at fracture initiation depends on the loading of the material. READ MORE

  4. 3. A Feasibility Study of Automated Quality Control and Component Handling in a Plastic Flange Deformation Process

    University essay from Blekinge Tekniska Högskola/Institutionen för maskinteknik

    Author : Jakob Nilsson; Isak Olofsson; [2023]
    Keywords : Automation; Plastic Flange Deformation; Quality control; Design Research Methodology; Analytical Hierarchy Process; Automatisering; Kragning; Kvalitetskontroll; Design Research Methodology; Analytical Hierarchy Process;

    Abstract : Due to the global energy crisis there is a vast increase in demand for heat exchangers that reduces the energy consumption during energy transfer between mediums. The current manufacturing process for brazed heat exchangers at the world leading man-ufacturer, Alfa Laval, involves a partial assembly process called Plastic Flange Defor-mation (PFD). READ MORE

  5. 4. Embedment Behavior of Steel Dowel in Timber Loaded Perpendicular to the Grain : Influence of Assembly History in Combination with Moisture Change and Cyclic Loading

    University essay from Linnéuniversitetet/Institutionen för byggteknik (BY)

    Author : Mojtaba Khalili; [2023]
    Keywords : Embedment strength; elastic and plastic embedment stiffness; moisture content; swelling and shrinkage; steel dowel; assembly history; cyclic loading;

    Abstract : The embedment behavior of dowels in timber structures, as an essential parameter in the design of connections, is the subject of this thesis. There are numerous advantages using timber structures, including sustainability, energy efficiency, and aesthetic appeal. READ MORE

  6. 5. Experimental assessment of properties for a non-aqueous and precipitating alkanolamine absorption system

    University essay from Lunds universitet/Kemiteknik (CI)

    Author : Erik Robertsson; [2022]
    Keywords : AMP; DMSO; CCS; BE-CCS; Viscosity; Density; Freezing Temperature; Chemical Engineering; Technology and Engineering;

    Abstract : With increasing atmospheric carbon dioxide (CO2) concentrations, energy efficient carbon capture and storage (CCS) technologies could prove important to enable reductions in the global CO2 emissions. The aim was to investigate a novel, non-aqueous, and precipitating chemical absorption system of dimethyl sulfoxide (DMSO) and 2-amino-2-methyl-1-propanol (AMP), which forms solid carbamate salt crystals with CO2. READ MORE