Essays about: "töjning"
Showing result 21 - 25 of 32 essays containing the word töjning.
-
21. Distributed Temperature Sensing Using Phase-Sensitive Optical Time Domain Reflectometry
University essay from KTH/Tillämpad fysikAbstract : This thesis explores and evaluates the temperature measuring capabilities of a phase-sensitive optical time-domain reflectometer (φ-OTDR), which exploits Rayleigh backscattering in normal single mode optical fibers. The device is constructed and its setup explained, and a protocol for making temperature measurements with it is developed. READ MORE
-
22. Basic Creep of Young Concrete - Sensitivity in the Evaluation Method
University essay from KTH/BetongbyggnadAbstract : Creep is defined as deformation that takes place under constant load after an initial elastic response. This thesis focuses on a material property problem area that concerns stress analysis. Focus is on stress development considering creep deformations occurring when a concrete structure is under load, i.e. READ MORE
-
23. Assessment of creep damage in Fe-Ni-Cr alloys
University essay from KTH/Hållfasthetslära (Avd.)Abstract : It is only a matter of time before components working in high temperature environments fail due to creep. Design for creep is therefore of vital importance to maximize the lifetime of components and reduce costs that may arise from maintenance and replacement of components. READ MORE
-
24. Prediction of early age and time dependent deformations in a massive concrete structure
University essay from KTH/BetongbyggnadAbstract : The heat development that occurs due to the hydration of cement is important to consider during casting of massive concrete structures. By using computer programs that are based on finite element methods (FEM), simulations can be performed on the heat- and strength development. READ MORE
-
25. Modular friction test rig for measuring torque and tension in threaded fasteners
University essay from KTH/Maskinkonstruktion (Avd.)Abstract : This report describes the development of a modular friction test rig for threaded fasteners. This device can measure the shank torque and the clamp force during the tightening of threaded bolts, with a size of M3-M14 and clamp length of 30-160mm. READ MORE